Wood Locker Specifications

Part 1 – General

1.01 Submittals

A. Shop Drawings: Drawings supplied detailing locker parts and assembly along with layout indicating dimensions and installation procedure to cover all situations.

1.02 Product Handling

A. Storage: Lockers will be protected and stored in a suitable environment.

B. Delivery: Assembled lockers to be delivered when installation area is complete and watertight.

Part 2 – Products

2.01 Components

A. Locker body: Tops, bottoms, sides and shelves to be constructed from ¾” industrial grade #47 particle boards with abrasion, stain and impact resistant white Melamine.  Backs of the same material using a ½” thickness.

B. Edge banding: All exposed edges to be banded with matching PVC, or Wood Veneer.

C. Hooks: Single or double pronged side-hooks available in either brass, nickel plated or chrome.

D. Hinges: European-concealed, self-closing hinges standard. 2 hinges for lockers 36” in height and under, 3 hinges for lockers 48” and above.

E. Locks: Heavy-duty cam lock with 2 keys each.  Master built-in combination, coin operated card key, push button and pad lock hasps are also available.

F. Ventilation: Perimeter ventilation through 3/16” opening between tops, bottoms, sides and door.

G. Doors and End Panels:

1. ¾” high-density particleboard door with a high-pressure laminate applied to one side.  Exposed sides edge-banded to match.

2. ¾” solid raised panel door, red oak standard.  Other species available upon request.  Radiused edging all sides.  All door parts are precision machined with door joints glued and sealed to prevent moisture absorption.  Center panels are spaced to allow for movement due to the changes in the environment. 

3. ¾” flat panel veneer door with exposed edges banded to match.

4. ¾” end panels to match door style supplied.

H.  Finish: All wood components supplied with one coat of sealer and two coats of clear lacquer.  Optional stains available.

I. Number/Name Plates: 1 /12” round number disks available in brass, chrome or brushed aluminum, inlaid flush with door.

2.02 Fabrication:

A. Fabricate lockers rigid, square and without warp with finished surfaces flat and free from chips.

B. Machine all parts and holes accurately and mechanically fasten for tight joints and connections.

C. Supply matching fillers as required for proper installation.

Part 3 – Execution

3.01 Installation:

A. Lockers to be installed in accordance with manufacturers instructions.  Units must be level, plumb and rigid with faces flush.  Units to be connected together through pre-drilled holes and anchored to base and walls as directed.

B. Adjust all doors and hinges for proper operation.

C. Attach number plates in sequence as requested.

Part 4 – Warranty

All wood parts shall be structurally sound and free from defects in materials and workmanship under normal use and conditions for a period of five (5) years from the date of delivery.  All locks carry a one (1) year manufacturer’s warrantee.  Heavy-duty, rust-proof hinges offer a manufacturer’s lifetime guarantee.