Factory Supply, Inc. - trucks, cargo bars, cranes, dockplates.

Page 3

Pallet Rotators

Ergonomic features allow all the pallet to raise or lower as the weight changes. Maintains the top of the load at a convenient working height. Self-contained air system does not require a dedicated air line and table has Safety finger guards under rotator ring. Turntable diameter is 43".

WH-1025	1000 -4500lb cap.	$2200
WH-1067	450 -3000lb cap.	$2200
WH-1029	Stainless Steel (both load capacities)	$7700
Options
WH-1027	Bellows guard	$530
WH-1028	Two casters and two wheel dolly handle	$480

Prices updated 8/14/06

Portable Pallet Stands

These heavy duty 48" x 40" pallet transporters have a 4,000lb capacity and have 8" phenolic casters so pallets can be pushed safely around the work place. Pictures shown with optional corner guides.

Adjustable Height with Tilt
V-CATH-4048	24" to 32" service range	$445
Adjustable Height no Tilt
V-CAH-4048	24" to 32" service range	$380
Fixed Height at 12"
V-CFH-4048	$220
Fixed Height at 12" with Carousel Ring
V-CG-4048	40" dia ring, welded on	$535

Optional Corner Guides (each) $18
Optional Welded in Dent Stops $135

Pallet Carousels

Carousel is shown with rings
separated to illustrate bearings

Options Shown Below

Carousel safely rotates materials 360 degrees with the assistance of an operator. Ergonomic design reduces injury. This steel constructed carousel with low-friction encased bearings is only 2" high. 48" and smaller usually ship in 48 hours; 1 week on larger carousels.

Diameter	Capacity	Item #	Price
18" Dia	2000 lb	V-CA-18-2	$240
24" Dia	2000 lb	V-CA-24-2	$270
24" Dia	4000 lb	V-CA-24-4	$310
30" Dia	2000 lb	V-CA-30-2	$300
30" Dia	4000 lb	V-CA-30-4	$330
36: Dia	2000 lb	V-CA-36-2	$300
36: Dia	4000 lb	V-CA-36-4	$345
40" Dia	2000 lb	V-CA-40-2	$310
40" Dia	4000 lb	V-CA-40-4	$355
40" Dia	6000 lb	V-CA-40-6	$395
48" Dia	2000 lb	V-CA-48-2	$440
48" Dia	4000 lb	V-CA-48-4	$485
48" Dia	6000 lb	V-CA-48-6	$530
60" Dia	2000 lb	V-CA-60-2	$485
60" Dia	4000 lb	V-CA-60-4	$530
60" Dia	6000 lb	V-CA-60-6	$590
72" Dia	2000 lb	V-CA-72-2	$595
72" Dia	4000 lb	V-CA-72-4	$635
72" Dia	6000 lb	V-CA-72-6	$695

Options
V-BASE-12	Elevated Base (40x40) 12" High	$420
V-BASE-24	Elevated Base (40x40) 24" High	$555
V-TP-4848-R	1/4" Thick Top Plate (Round)	$230
V-TP-4848-S	1/4" Thick Top Plate 48" (Square)	$230
V-HBK	Manual Brake	$78
V-HOD	Hand Lock Detent	$110
V-FTK	Foot Lock Detent	$139

Prices updated 9/06/06 and reflect current steel surcharge.

King Pin Carousel

All the ergonomic benefits of the standard carousel with a top plate and stabilizing center pin. Unit will handle a wider variety of loads. Features include 1/4" tread plate top on 4,000 lbs. and 3/8" tread plate top on 6,000 lbs. models. Also includes a heavy-duty maintenance free bearing. The king pin design allows off set loading up to 50% of the capacity on at least 50% of the deck. Standard top plates are square with rounded corners. Contact factory for special sizes.

ITEM#	W x L	Height	Cap. (lbs)	PRICE
CA-KP-3636-4	36" x 36"	2-5/8"	4,000	$812
CA-KP-3636-6	36" x 36"	2-3/4"	6,000	$921
CA-KP-4848-4	48" x 48"	2-5/8"	4,000	$1060
CA-KP-4848-6	48" x 48"	2-3/4"	6,000	$1130
CA-KP-6060-4	60" x 60"	2-5/8"	4,000	$1240
CA-KP-6060-6	60" x 60"	2-3/4"	6,000	$1321

updated 3/26/08

Powered Carousel

This carousel has a 4,000 pound capacity with a 2 3/8" platform height and a 48" diameter turntable. Variable speed from 3 to 12 rpm. Chain drive and power is 115 volt. Standard control is foot switch. The optional approach ramp is 48" wide x 36" long.

POW-CAR		$2975
SWA-R-4836	optional approach ramp	$310
SWA-REV	reverse option	$120

Prices updated 8/14/06

Thin Spin Disc Turntable

Pallets can be easily rotated by one person. Fits neatly under hand pallet jack for load transfer. 4,000 lb capacity and are 7/8" in overall height. A safety detent lock restricts carousel rotation when not in use.
Ships out in 48 hours.

LP-4000T-51	51" useable dia	$855
LP-4000T-45	45" useable dia	$810
LP-4000T-39	39" useable dia	$775

Prices updated 8/14/06 and show current steel surcharge

NEW! Stand Alone Powered Carousel

These 48" diameter powered carousels have a beefy 4,000lb. capacity! The variable speed 115V turntable is operated by foot control and is 3-12 RPM. Comes complete with turntable base and smooth flat top. Unit is 24" high and weighs 788lbs. 2-3 weeks to fabricate.

Model	Description	Height	RPM	Weight (lbs.)	Price
STPC-CD	chain driven	24"	3-12	788	$3600
STPC-EHD	electric hydraulic	12"	8	788	-