Page 5

Stainless Steel Workbenches

Tapered Front Edge

Our premium Type 304 stainless bench is sanitary, rust resistant, tuff, has tapered and sealed front edges and has an optional backsplash, drawer and casters! 18 gauge lower shelf is 12" from floor and the table height is 36". Legs are 16 gauge 1 5/8" dia. and are the screw type for adjustment. This table meets USDA & NSF standards for direct food contact. Ships KD.

Legs, shelf, top are ALL stainless.

*PREMIUM TABLE WITH 18 GAGE TOP*
YB-1610	48" x 30"	$525
YB-1611	60" x 30"	$621
YB-1612	72" x 30"	$725
YB-1613	96" x 30"	$894
OPTIONS
14 gauge stainless top		$50
Stainless steel drawer		$210
Casters, all swivel w/brakes		$120
6" high backsplash		$120

Type 430 stainless is an economical alternative to Type 304. These tops are a little less corrosive resistant when exposed to certain chemicals and liquids over a long period of time. These are 18 gauge stainless steel tops that are 36" high and are supported by 16 gauge 1 5/8" galvanized steel legs. The lower shelf is 18 gage galvanized steel. This table meets USDA & NSF standards for direct food contact. Ships KD. Subtract $20 for 24" wide table.

Economical Table - 16 ga. top
YB-1614	48" x 30"	$552
YB-1615	60" x 30"	$649
YB-1616	72" x 30"	$763
YB-1617	96" x 30"	$939

Prices Updated 08-27-09

Stainless Steel with Maple Top

Our premium maple top tables have a beefy 1 3/4" thick top! These tables have a 16 gage Type 304 stainless steel lower shelf, Type 304 stainless steel 1 5/8" dia. legs, bullet style leveling feet, 36" over all height, and meets OSHA standards for direct food contact! The 96" and 120" models come with 6 legs. Units ship KD in 2 weeks.

55-231D	36" x 30"	$480
55-768D	48" x 30"	$532
55-769D	60" x 30"	$595
55-770D	72" x 30"	$556
55-771D	96" x 30"	$910
55-232D	120" x 30"	$1031

Economy maple top tables have a 1 1/2" thick top with galvanized legs and shelf.

55-235D	36" x 30"	$375
55-760D	48" x 30"	$406
55-761D	60" x 30"	$468
55-772D	72" x 30"	$530
55-773D	96" x 30"	$700
55-236D	120" x 30"	$856

*OPTIONS*
Stainless steel drawer	$210
Casters, all swivel w/brakes	$95
Casters for 6 legged tables	$125

Prices updated 8-27-09

Stainless Table with Enclosed Back

This all-welded stainless table is 36" high, has adjustable bullet style feet, and fully enclosed back panel.. Top and legs are 16 gage and bottom shelf is 18 gage. This table meets USDA standards, ships in 2 weeks and ships set up. Picture shows less optional back splash.

Rear Paneled Work Platform
55-835D	48" x 30"	$1020
55-836D	60" x 30"	$1170
55-837D	72" x 30"	$1300
55-838D	96" x 30"	$1575
OPTIONAL 6" REAR BACK SPLASH		$120

Prices updated 8-27-09

Stainless Steel Table with Sliding Doors

This all-welded stainless table is 36" high, has adjustable bullet style feet, and two stainless steel sliding doors with recessed handles. Top, legs, doors are 16 gage and bottom shelf is 18 gage. This table meets USDA standards, ships in 2 weeks and ships set up. Picture shows optional back splash.

Sliding Door Worktable
55-346D	48" x 30"	$1292
55-347D	60" x 30"	$1457
55-348D	72" x 30"	$1677
55-349D	96" x 30"	$2172
OPTIONAL 6" REAR BACK SPLASH		*$120*

Prices updated 08-27-09.